Millivolt
The RaceFlight Millivolt flight controller is the most advanced,
performance driven, flight controller everdesigned in a tiny
package.Capable of running 32kHz gyro sample, PID loop, and motor loop,
processing all calculations in real time. The Millivolt is truly at the
top of its tiny class . The Millivoltuses a F405 MPU and an Invensense
20602 gyroin combination with RaceFlight software to give you the BEST
performance possible. This gyro is by far the most noise free and
accurate gyro available.
Performance
The Millivoltpresents not only the BEST performance, but also the
most STABLEperformance due to the amazing vibration rejection
technology implemented in RaceFlight. Our filters allow your quad to
stay in the air no matter what! Damaged propellers caused by that insane
gate clip on turn 3? Not a problem. You can still finish the race!For
most people tuning is not even required. Our boards come preloaded with
software and defaults that should fly amazing for 99% of people.
In addition to the vibration rejection technology, the SSG
(Invensense 20602) gives you the highest speeds currently possible with
the lowest noise floor and highest sensitivity. The Invensense 20602
gyro has never been used in any flight controller before (except the
Revolt) and definitely gives you the leading advantage over others.
Software
Our flight controller comes pre-loaded with the latest RaceFlight
Community release. Just go to the google store and download the latest
configurator and you should be ready to connect. Drivers should no
longer be needed.
RaceFlight One is also available in beta format. Just join our slack at
https://raceflight.net/invite/ and ask to be added to the RaceFlight One
channel. This is truly amazing software, which flies so well you can
completely eliminate prop wash. Setup is a breeze as well, just run a
couple wizards and you will get right up into the air.
Setup Simplicity
Setting up the Millivolt is easy. The solder pin layout is easy to
read with motor connections in each corner. Just solder the closest
motors and remember the order 1, 2, 3, 4. Select your voltage on the
bottom, as well as inverted or not. The Millivoltalso features DFU free
updating and a self-healing and updating bootloader, just in case
something does go wrong.
Features
- Integrated vibration dampening dummies
- Inverter for Taranis and Futaba radios
- 3.3v or 5.0v for Spektrum, Taranis, etc
- LED Driver for WS2812b programmable LED
- Infrared LED Race Transponder support –just solder an infared LED to the Revolt and set it up in the RF1 configurator
- Future iPhone and Android configurator support
- High Speed 32khz gyro, lowest noise floor and highest sensitivity gyro everused
- Through hole solder pads – forms an I-Beam when soldered for extra strength
- FrSky Taranis, Spektrum, Futaba, JR, IBus, Sbus and other radio support
- Integrated buzzer driver
- Voltage and current ADC pins, for full voltage and current monitoring
- Full telemetry output support
- ESC flashing and configuration built into configurator
- Most active software development
- Selectable 3.3v or 5v voltage
- 2 serial uarts
- Bluetooth expandable
- F4 processor
- 16mb of flash memory
- GPS expandable
- Dimensions: 25mm x 25mm
- Mounting holes: 20mm squared to center of holes
The RaceFlight Guarantee
In addition to all the other amazing things the Millivoltpresents,
Millivoltersget access to RaceFlight’s ticketed tech support which will
include step-by-step help with installation, tuning, and anything else
that may arise with your Millivolt. We have by far the best support
system and community in the industry. Join our slack and talk to other
users, or contact support directly.
No recommended products at the moment.